Electrical 4 min read Updated

Burning smell from a socket: act now

Why you should switch off at the board, leave it alone and call straight away.

Electrician repairing a wall socket

You walk past a socket and catch a sharp, acrid smell like burnt plastic, hot dust or even fish. Maybe you notice a brown mark on the faceplate, or the plug feels warm. Many people shrug it off and carry on, but a burning smell from an electrical socket is never normal. It is one of the clearest warning signs of an electrical fault, and it can lead to a fire. This guide explains what to do straight away, what causes it and how to stop it happening again.

What to do immediately

  1. Stop using the socket. Do not plug anything else in, and do not try to unplug something hot with your bare hands.
  2. Switch off at the consumer unit. Turn off the circuit that feeds the socket, or the main switch if you are unsure which one it is. Switching off removes the source of heat.
  3. Look but do not touch. Check for scorch marks, melted plastic, smoke or discolouration. If anything is still hot, leave it alone until it has cooled.
  4. Keep the circuit off until a qualified electrician has inspected it. Do not reset the switch to see if the problem has gone.
  5. Call an electrician straight away. Do not wait until morning.

If you see smoke or flames

If there is visible smoke or fire, your priority is getting everyone out safely. Leave the property, close the door behind you if it is safe to do so, and call 999. Do not use water on an electrical fire, because it conducts electricity and can make things worse. Do not go back inside for belongings. Only use a fire extinguisher if you are trained, the fire is small and you have a clear escape route, and make sure it is a type rated for electrical fires.

Why do sockets smell of burning?

Electricity passing through a poor connection creates heat. Over time, that heat melts the plastic, scorches the wiring and can ignite dust or nearby materials. The usual causes are:

  • Loose connections. The wires at the back of a socket can work loose through age, vibration or poor original installation. A loose terminal has high resistance, which generates heat.
  • Overloading. Plugging high-power appliances such as heaters, kettles or tumble dryers into extension leads and adaptors can draw more current than the socket or lead can safely carry.
  • Worn or damaged sockets. Sockets have moving contacts that wear out. If plugs fit loosely or fall out, the contacts may be arcing.
  • Damaged or old wiring. Cables with perished insulation can short or overheat.
  • A faulty plug or appliance. The fault may be in the plug, the lead or the device itself, not the socket.
  • Moisture. Damp or condensation in a socket, particularly in kitchens, bathrooms and outdoors, can cause tracking and burning.

Warning signs to watch for

A burning smell is the loudest alarm, but there are earlier signs that something is wrong:

  • Brown or black marks around a socket or switch.
  • A socket or plug that feels warm or hot to touch.
  • Buzzing, crackling or sizzling sounds.
  • Lights that flicker or dim, or a socket that works intermittently.

If you notice any of these, stop using the socket and have it checked, even if there is no smell yet.

What an electrician will do

A qualified electrician will first make the circuit safe, then find the cause. They will inspect the socket and the back box for heat damage, test the wiring and connections, and check the circuit for faults and overloading. In most cases, they will replace the damaged socket and any scorched cable, tighten or remake connections, and test the circuit before restoring power. If they find a wider problem, such as old wiring or an overloaded ring main, they will explain what needs to be done.

How to prevent it

  • Do not overload sockets or daisy-chain extension leads, and uncoil extension leads fully when in use.
  • Plug high-power appliances directly into a wall socket where possible.
  • Replace sockets that are cracked, loose or discoloured.
  • Have your fixed wiring inspected every 10 years in an owned home, and every 5 years or at change of tenancy in a rented one, through an Electrical Installation Condition Report.
  • Fit smoke alarms on every floor and test them monthly.

Do not wait until morning

Overheating connections get worse, not better. The danger is highest at night, when a fire can start while you are asleep. If you smell burning, switch off and call. Our electricians are vetted, qualified and insured, and available 24 hours a day. We typically reach you within 30 to 60 minutes, make everything safe on arrival, and repair the fault on the first visit wherever we can.

Keep reading

More guides

← All advice guides

Open now · 24 hours a day

Emergency electrician, plumber or locksmith

One number, 30 to 60 minutes, any hour of any day.

Call us 24/702034112027
Call us 24/702034112027